-
Home
-
BCT Coil Taping
BCT Coil Taping SystemsBCT Suspended Coil Taping Machines
BCT Bar Taping SystemsBCTVL-B Bar Bench Taping Machine
Other Coil Taping EquipmentNCT Narrow Coil Taping Machine
-
Coil Manufacturing
Coil Manufacturing Equipment
WindersW-MAW Multi Axis Loop Winding Machine
Ridgway Rotor & Loop Winding Range Turn Taping Machine Coil Pull-Out MachinesPOM-STD Standard Coil Pull-Out Machine
POM-WPB Wind and Pull-Out Beam
POM-CC Continuous Coil Forming Machine
Ridgway Coil Pull-Out Machines Range Other Coil Manufacturing Equipment -
Cable & Conductor Taping
Cable & Conductor Taping Machines
Horizontal TapingHTM-C Concentric Taping Machine
HTM-HCC High Capacity Concentric Taping Machine
Vertical Taping Glass Taping Kapton© Taping Flexible Conductor TapingBCT110VLBM Flexible Conductor Taping Line
Taping Heads -
Drum Stands
-
(S)RTP Taping Machines
-
Galleries
-
Careers
Ridgway POM-STD
STANDARD COIL PULL-OUT MACHINE RANGE
Designed to offer a cost effective and versatile solution to form stator coils.
| MODEL | COIL SECTION (H X W) | SLOT LENGTH | LOOP LENGTH | SPREAD AT 0° | COIL DROP |
|---|---|---|---|---|---|
| CS15 | Up to 38mm x 19mm | Min 115mm Max 762mm |
1500mm | 400mm | 250mm |
| CS20B | Up to 38mm x 19mm | Min 115mm Max 1219mm |
2000mm | 400mm | 250mm |
| CS25B | Min 6.4mm x 3.2mm |
Min 115mm Max 1524mm |
2500mm | 400mm | 250mm |
| CS25C | Min 6.4mm x 3.2mm Max 57mm x 29mm |
Min 115mm Max 1524mm |
2500mm | 787mm | 340mm |
Coil Pull-out Machine
The POM-STD range of coil forming machines are used to spread coils quickly, accurately and efficiently into their final shape according to the individual coil design requirements.
Offering a cost effective and versatile solution, the machines are fully adjustable and simple to operate.
Capabilities
▼ Pneumatically powered, the POM-STD range has the capability to form stator coils having a maximum loop length of 2500mm with a maximum coil stack size of 57mm x 29mm.
Easy to set
▼ For reference, linear scales are fitted to ensure repeat accurate set ups are quickly and easily achieved.
Easy to operate
▼ The coil forming process is assisted by using air pressure. Little manual effort is required of the operator. To aid the operator, after the loop has been loaded, actuation of a foot pedal closes all four slot clamps simultaneously. The exclusive ballast tank minimizes air supply fluctuations, producing coils smoothly and quickly.
Adjustable tooling
▼ Fall away pin type knuckle holders guarantee firm clamping action and quick release. Both the length and the thickness of the coil knuckle holders are adjustable.
▼ SPECIFICATION
Coil stack height
Dependent on tooling
Coil stack width
Dependent on tooling
Length of cell (coil straight)
Max: 1000mm
Min: 380mm
Overall loop length (eye to eye)
Max: 2000mm
Min: 875mm
Angle between coil sides
Max: 120° (included)
Min: 0°
Coil spread
Max: 900mm
Min: 150mm
SPEC SHEET
Download POM-STD Standard Coil Pull-Out Machine Spec Sheet
(PDF 101KB)