-
Home
-
BCT Coil Taping
BCT Coil Taping SystemsBCT Suspended Coil Taping Machines
BCT Bar Taping SystemsBCTVL-B Bar Bench Taping Machine
Other Coil Taping EquipmentNCT Narrow Coil Taping Machine
-
Coil Manufacturing
Coil Manufacturing Equipment
WindersW-MAW Multi Axis Loop Winding Machine
Ridgway Rotor & Loop Winding Range Turn Taping Machine Coil Pull-Out MachinesPOM-STD Standard Coil Pull-Out Machine
POM-WPB Wind and Pull-Out Beam
POM-CC Continuous Coil Forming Machine
Ridgway Coil Pull-Out Machines Range Other Coil Manufacturing Equipment -
Cable & Conductor Taping
Cable & Conductor Taping Machines
Horizontal TapingHTM-C Concentric Taping Machine
HTM-HCC High Capacity Concentric Taping Machine
Vertical Taping Glass Taping Kapton© Taping Flexible Conductor TapingBCT110VLBM Flexible Conductor Taping Line
Taping Heads -
Drum Stands
-
(S)RTP Taping Machines
-
Galleries
-
Careers
Ridgway LHT
LHT TAPING MACHINE
Designed to apply layers of tape (Kevlar®, steel, glass etc.) on to plastic liners in the manufacture of Reinforced Thermoplastic Pipe (RTP–SRTP)
Each head applies multiple tapes with standard tape tensions up to 1kN. The machine follows a signal from an upstream caterpillar and, with the use of dedicated software, lays the tapes accurately to the required specification.
Typically supplied in multiples of 2 tape heads, the heads rotate in opposite directions to cancel out the rotation forces generated when applying the tapes.
The pipe made by these machines is widely used in the oil and other industries.
LHT Taping Machine
Each LHT machine applies multiple tapes with tensions up to 1000N.
The machine follows a signal from an upstream caterpillar and, with the use of dedicated software, lays the tapes accurately to the required specification.
Up to 10 LHT taping machines can be configured in an RTP taping line to provide multiple reinforcement layers.
Ridgway SRTP Taping Machine - shown with 6 Tape Pads
Servo drives
▼ Servo drives for precise layering control.
Tape positioning
▼ Automated positioning system for accurate tape application.
Adjustable taping angles
▼ Graduated sector plates fitted to all final rollers for precise angle adjustment.
Controlled braking
▼ Close loop controlled electronic braking for precise and constant tape tensioning.
Remote diagnostics
▼ Control cabinet with remote diagnostics.
Flexible interface
▼ Modern control system interfaces with other production line equipment – such as caterpillars and carousel drum stands.
Ridgway RTP Taping Machine - shown with 2 Tape Pads
▼ SPECIFICATION
Tape pads
Ø Up to 1600mm x 300mm core
Weight: Up to 900kg
Number of pads: Up to 6
Tape widths
Up to 300mm
Tape material
Kevlar®, steel, glass, etc.
Tape tension
Up to 1000N
Taping angles
1 to 60 degrees
Speed range
Up to 40 rpm
Pipe OD
Max. dia. 350mm
Electrical supply
400 volt 3 phase 50 hz (other supplies available)
Compressed air supply
6 bar – clean and dry
SEE THE VIDEO
Video Demonstration of SRTP Taping Machine (2m31s)
SPEC SHEET
Download LHT Spec Sheet
(PDF 197KB)