-
Home
-
BCT Coil Taping
BCT Coil Taping SystemsBCT Suspended Coil Taping Machines
BCT Bar Taping SystemsBCTVL-B Bar Bench Taping Machine
Other Coil Taping EquipmentNCT Narrow Coil Taping Machine
-
Coil Manufacturing
Coil Manufacturing Equipment
WindersW-MAW Multi Axis Loop Winding Machine
Ridgway Rotor & Loop Winding Range Turn Taping Machine Coil Pull-Out MachinesPOM-STD Standard Coil Pull-Out Machine
POM-WPB Wind and Pull-Out Beam
POM-CC Continuous Coil Forming Machine
Ridgway Coil Pull-Out Machines Range Other Coil Manufacturing Equipment -
Cable & Conductor Taping
Cable & Conductor Taping Machines
Horizontal TapingHTM-C Concentric Taping Machine
HTM-HCC High Capacity Concentric Taping Machine
Vertical Taping Glass Taping Kapton© Taping Flexible Conductor TapingBCT110VLBM Flexible Conductor Taping Line
Taping Heads -
Drum Stands
-
(S)RTP Taping Machines
-
Galleries
-
Careers
Ridgway BCT110VLBM
FLEXIBLE CABLE BENCH TAPING MACHINE
Designed to apply layers of insulation on to flexible cables
up to 50mm uncovered diameter
BCT110VLBM Taping Machine
Twin tape applicators
▼ Electrically driven taping machine combining a rotating taping head fitted with a pair of tape applicators.
Linear servo drive
▼ Bench mounted, modular linear rail - servo drive system.
▼ Machine length configurable to customer requirements.
Auto reverse
▼ Auto reverse at the end of each pass.
▼ The number of passes can be preset and the count displayed on the control panel.
Cable end cone taping
▼ Programmable to produce cone taping at the cable ends if required.
Pneumatic cable tensioning
▼ Fully adjustable, pneumatically controlled cable tensioning device.
Variable lap taping
▼ Head rotational speed and linear speed adjustable to achieve the desired taping pitch/tape overlap.
Retractable cable supports
▼Fully automatic, retractable cable supports with pneumatic grippers to prevent axial twist during taping.
▼ SPECIFICATION
Conductor capacity (uncovered)
Ø 10mm to 50mm
Conductor capacity (covered)
Ø 110mm
Machine length
Configurable to customer requirements
Tape widths
20mm to 50mm wide
Tape tension
1.0 kg to 10.0 kg
Tape spool
Ø 50mm and Ø 75mm core
Ø 200mm outside
Machine taping speed
30 rpm to 150 rpm
Traverse rate
10mm/rev to 40mm/rev
Machine centre height
1100mm nominal
Machine guarding
Light curtain and head guard
Compressed air supply
6 bar – clean and dry
Electrical supply
400 volt, 3 phase 50 hertz
(other supplies available)
SPEC SHEET
Download BCT110VLBM Spec Sheet
(PDF 128KB)